|
The Lucky LED spot (1) is available in anodized aluminium or stainless steel. Because of it's wide 90° light angle it's the ideal lighting solution for kitchens and toilets.
Mounting the Lucky LED spot
The Lucky LED spot can be combined with the Lucky Spacer(2). With this casing the LED spot is easily transformed into a surface mounted spot (4).
Mounting is simple. Mount the spacer on a surface with the included screws(3), guide the wire through the spacer and snap the Lucky LED spot (1) into the spacer (2).
Power supply and electrical connections
The Lucky LED spots are powered by Lumotech® drivers. All Lumotech® drivers can be applied in combination with the Luzern series LED spots.
Dimming is always performed with an external dimmer. Please refer to the Dimmerlist for suitable - mains - dimmers.
'Click & Go' connection
The 'Click & Go' cable system provides an easy and modular connection of the LED spots to a driver.
The following drivers are equipped for the 'Click and Go' system:
- L05020NS - Non dimmable.
- L05021NS - Mains dimmable.
- L05011iNS - Pulse dimmable.
- L05016iNS - Pulse dimmable.
The cables with an splitter block are available in standard lengths of 1 metre (2-way splitter) and 2 meters (4-way splitter) and there are extension cables available with lengths of 3, 5, 7 and 10 metres.
At maximum power load the total (secondary) length of the cable should not exceed 10 metres.
A variety of configurations can be found in the following PDF:
 Connectionsceme_LUMOluce.pdf
|
