Home
Home > Lugo
Lugo wall mount LED spot explained | Print |
The Lugo wall mount LED spot (1) is available in four different LED light colours - Warm White, Natural White, Cool White and Blue. It can be built in concrete, stone, plaster board and wooden walls. There are two mounting boxes available for easy integration of the LED spots. lugo_explained_v1

Lugo stucco plate with plastic casing

The Lugo Stucco plate with plastic casing (2) allows for integration of the LED spot in concrete, plaster board and stone walls. The hole in the wall should be at least 89 x 89 x 53 mm. Mount the stucco plate flat off with the surface and plaster the plate with the wall (4). With the finished casing in place connect the wires and easily click the Lugo spot in to the casing.

lugo_explained_stuc_v1

Lugo metal box

Lugo metal box (3) allows for the direct integration of the LED spot in stone walls. Just mount the metal box (3) while bricklaying the wall(5). With the wall finished connect the wires and click the Lugo spot in the Lugo metal box.

lugo_explained_v1_metalbox

Power supply and electrical connections

The Lugo LED spots are powered by Lumotech® drivers. All Lumotech® drivers can be applied in combination with the Luzern series LED spots.

Dimming is always performed with an external dimmer. Please refer to the Dimmerlist for suitable - mains - dimmers.

 

'Click & Go' connection

The 'Click and Go' cable system provides an easy and modular connection of the LED modules to a driver.

 

The following drivers are equipped for the 'Click and Go' system:

  • L05020NS - Non dimmable.
  • L05021NS - Mains dimmable.
  • L05011iNS - Pulse dimmable.
  • L05016iNS - Pulse dimmable.

The cables with an splitter block are available in standard lengths of 1 metre (2-way splitter) and 2 metres (4-way splitter) and there are extension cables available with lengths of 3, 5, 7 and 10 metres.

 

At maximum power load the total (secondary) length of the cable should not exceed 10 metres.

 

A variety of configurations can be found in the following PDF:

 Connectionsceme_LUMOluce.pdf

Item
Lumoluce article number
(1)

L05310

(2) L05280
(3) L05285

 


Please note that all images and descriptions above are not intended to be used as an installation instruction or manual. The information is provided purely to illustrate the capabilities of the products and no rights can be derived from it. When installing a product always refer to the manual which comes with the product.
 
Login Lumoluce